Friday, September 6, 2019

Home video game industry analysis Essay Example for Free

Home video game industry analysis Essay History In 1949 the video game was thought of for the first time by an engineer named Ralph Baer but it would be years before video games would enter the spotlight. 1 In 1972 Steve Bushnell started the first gaming company Atari. Until 1978 there were very few games for the home system. In 1982 Atari releases a newer version and sales start to sore. In 1985 Nintendo enters the market with the NES. Nintendo still outsells both companies 10 to 1. In 1995 Sega releases Sega Saturn three months before the projected date and there are not enough games released because of this and sales are dismal. The same year Sony releases the Playstation at $100 less than expected with a variety of different game titles, sales are strong. In 1996 Nintendo releases the N64 which is received well by the public. Sega lowers prices to stay competitive. In 1999 Nintendo and Sony are in an intense pricing war on their competing systems. Microsoft also announces they will be entering the market with the X-Box. Nintendo releases the Gamecube and the Gameboy advance the same year. X-Box is released in 2001 and is received well and is out of stock most places. With all of the systems and game prices very high, piracy is becoming more and more of a problem with Mod Chips being developed that allow for pirated games to be played on all consoles. In late 2005 Microsoft releases the X-Box 360. 2 The following year Nintendo releases the Wii and Sony releases Playstation 3 and the problem of piracy still continues to this day. SWOT Analysis Industry strengths include well developed brand image for the leading three competitors. Each of the three leading competitors has successfully exploited its target consumers in age categories. They all have excellent advertising campaigns and have high corporate attention and resources. Industry weakness include rising cost of materials and RD, the expenditures for developing additional high tech systems and games for the system at a reasonable price is becoming increasingly difficult leaving much lower profits for corporations. Opportunity exists when entry into the market is preceded by all others in the industry. Industry trends are leaning towards older population who appreciate graphics and complexity of games and have the resources to pay more for those games. Many gamers are ready to upgrade systems as new technology emerges. Threats to the industry include strong market competition, rapid development of technology, the cost of technology and the rating system given to games. Sub-markets are also gaining popularity including the handheld market and online gaming, which threaten market share. Business and Corporate Strategy Corporate and business level strategies for this industry are equivalent. The inferred industry mission is to provide entertainment through interactive technology. The industry as a whole falls into the maturity segment of the life cycle. Generic competitive industry average is differentiation among games, graphics, and abilities/extras of the game console. In the beginning the strategy focused on the hardware to make profits. 3 The strategy has shifted to software for increased growth. Functional strategies include; superior quality in game graphics and well built hardware. Games have evolved from single applications to cartridges to CD-ROM. Graphics have evolved similarly from 8 to 16 to 32 bit. Threats stated in the SWOT analysis can be minimized by staying at the forefront of the competition in RD and finding ways to keep down cost while offering superior products. A venture into a back to the basics approach with the Wii has proved successful to attract female and novice users. Structure and Control Systems Strategic managers in the Video Game industry have developed a set of strategies to build competitive advantage to achieve their goals. Then an organizational structure has been put in place to use resources to create a competitive advantage. To evaluate how well the strategy and structure are working, managers developed specific performance measures. The four building blocks of competitive advantage are efficiency, quality, innovation, and responsiveness to customers. Recommendations With the home video game industry evolving, there are a few things that need to be in mind as you try to improve. You need to stay technologically advanced by continuing to change games, software, and new models. These adjustments require this technology to be low cost to be successful in this industry. If costs are high, not only will the customer be lost but you may lose your competitive edge. Competitive advantage in this industry is a critical factor. If you are ahead in the industry at one point, another company can come out with the next best selling product with new features and graphics capturing market share. Furthermore, being competitive in the sense of efficiency, quality, and response to the customers is critical in this industry. It influences a customer to buy your product rather than the competitors. If you have good quality and low prices, the customers would be willing to upgrade to the newer product line. With the industry constantly changing, you need to be on top of your game to be on top of the home video gaming industry.

Thursday, September 5, 2019

UK DMS Military Amputee Rehabilitation Strategy

UK DMS Military Amputee Rehabilitation Strategy Introduction The previous chapter provided information regarding the context and background to the study, the research aim and objectives, the statement of the problem, the scope and limitations of the study, and the study structure. Globally, the availability of rehabilitative staff and for that matter health workers in general has become a cause for concern. WHO (2006) commented that the world faces a shortage of 4.2 million health workers. Experts have warned that the number of health workers being trained domestically in many countries is threatened by the strain on public finances inflicted by the ongoing economic crisis. The EU could face a shortage of 1 million health professionals by 2020 or 2 million if long-term care and auxiliary professions are also taken into account (Jensen, 2013). To combat these shortages, the UK and USA recruit staff on an industrial and international scale (Eckenwiler, 2009). This chapter will review the UK DMS military amputee rehabilitation strategy. Comparing the UK with US, it will review the global rehabilitation situation, discussing a number of issues affecting service provision, and rehabilitation staff availability. Additionally, the chapter will review some of the current evidence supporting the impact relocation has on the retention of civilian rehabilitation staff, and review perspectives underlying staffs willingness to stay with health organisations. UK Military Rehabilitation Strategy The principal aim of the UK DMS Rehabilitation Strategy (the Defence Military Rehabilitation Programme) is to return service personnel to operational levels of fitness as soon as possible the fitter quicker principle. Where this is not achievable e.g. military amputee patients the aim is to attain the maximal level of physical, psychological and social health possible (MOD, 2010, p.1). The Defence Military Rehabilitation Strategy (the Defence Medical Rehabilitation Programme) currently encompasses two distinct capabilities; the DMRC (Defence Medical Rehabilitation Centre) and the DMRS (Defence Medical Rehabilitation Service). The DMRC is the foremost Defence rehabilitation centre where service personnel can receive rehabilitation for neurological, complex trauma (polytrauma) or force generation musculoskeletal conditions. The DMRS (MOD, 2016) is provided through a tiered network of rehabilitation facilities including 152 Primary Care Rehabilitation Facilities (PCRF) and 15 Regional Rehabilitation Units (RRU) across the UK and Germany. The PCRFs are Unit/Station based rehabilitation departments offering physiotherapy and exercise therapy on an outpatient basis. Patients with injuries that cannot be resolved at this level are referred to RRUs who provide rapid access to imaging services, podiatry and residential rehabilitation. The Defence Military Rehabilitation Programme is also supported by PRCs (Personnel Recovery Centres). They are residential facilities situated in or near garrisons and are available to all members of the Armed Forces during their recovery from sickness or injury. They aim to assist personnel back to either military service or a second career in a civilian occupation. US Military Rehabilitation Strategy United States Military Rehabilitation Strategy recognised the need for an overhaul of rehabilitation services during the War in Afghanistan. Seven years after US troops entered the Afghanistan conflict, Congress passed the Defence Authorization Act of 2008, which reflected legal and healthcare workers concerns about the quality and availability of medical care services (Lister, Panangala, and Scott, 2008). Accordingly, todays casualties receive an effective and expansive set of rehabilitative services that are akin to those seen in the in the United Kingdom. US rehabilitative care is provided by Tricare (a health care program of the United States Department of Defense Military Health System) and the Veterans Association (VA)2. Global Rehabilitation Issues Amputee Services Amputee rehabilitation services in high income countries are usually centrally funded and provide effective support. Amputee rehabilitation in low and middle income countries depends on their nations stage of development. In areas beset by war (for example Cambodia, Vietnam, Angola, Mozambique and Uganda), the greatest number of amputations (Staats, 1996) results from conflict and landmine explosions. As war drags on, the number of amputees increases and becomes an economic burden. In some countries the number of amputees is so great it is considered an ecological as well as economic disaster; this is the amputee volume imperative. In these regions amputee rehabilitation in any form is a luxury, if it is available at all. Global Rehabilitation Issues Population Effects When delivered at its best, rehabilitation provides people with the tools they need to attain maximal health, function, independence and self-determination (WHO, 2002). The World Health Organization (WHO) and the World Bank estimate that people with disabilities constitute at least 15% of the worlds population, with the majority in low and middle-income countries (WHO, 2011; Pryor and Boggs, 2012). Despite the continued increase in rehabilitation cases worldwide, prioritizing and monitoring of progress to improve health services for people with disabilities remains inadequate (Tomlinson et al., 2009). International evidence shows that people with disabilities have many unmet health and rehabilitation needs, face barriers in accessing mainstream health-care services, and consequently have poor health. With an ever-increasing incidence and prevalence of chronic disabling non-communicable diseases (Boutayeb and Boutayeb, 2005) and a global health refocus on reducing mortality, the world is experiencing a growing demand for rehabilitation services. Generally however, physical and functional rehabilitation is not emphasized in global health discourse (Pryor and Boggs, 2012), despite many recent documents, including various national and international policy instruments and the World Report on Disability (2011) that stressed that physical rehabilitation services are a necessary element of a comprehensive system. The WHO Global Disability Action Plan 2014-2021 (2015) includes the strengthening of rehabilitation services as a key objective. To achieve this objective, it provides capacity building actions (to meet this objective) for member states, national and international partners. Currently however, rehabilitation services, particularly in low and middle-income countries, do not have t he capacity to adequately address the needs of their populations. Global Rehabilitation Issues Finance and Resources UK and US military rehabilitation strategies are able to provide tiered and specialist services as they are centrally funded. Specialised amputee services in high income countries can also attract charitable donations in order to achieve the best care solution. Where rehabilitation is adequately financed, national rehabilitation strategies (NRH, 2009) dictate that care should be delivered from 3 perspectives: general rehabilitation; specialist rehabilitation; and a complex specialised rehabilitation service (C-SRS). In high income countries (UK, US, Australia, New Zealand, Norway, Sweden) rehabilitation is integrated in health care and financed under the national health system (Lilja et al., 2009; WHO, 2004). In other countries responsibilities are divided between different ministries. This stymies rehabilitation services at regional and local level; they are often poorly coordinated and not integrated into the overall system (OECD, 2008). The cost of rehabilitation can be a barrier for people with disabilities in high-income as well as low-income countries. Rehabilitation is problematic even where central funding from government, insurers, or NGOs is available, as it may not cover enough of the costs to make it affordable (Bijelow et al., 2004). Deficits in the New Zealand rehabilitation infrastructure and workforce already severely compromise access to and provision of rehabilitation services (New Zealand Rehabilitation Association, 2014). Australia (the sixth largest country in the world) is a high-income country, ranked 19th in terms of per capita GDP. The development of health services in Australia has mainly been focused on metropolitan and regional areas, with both on-site and outreach locations. A review of 30 years of development in rehabilitation, clinical services, and education reforms in Victoria (Pryor and Boggs, 2012), indicates that progress has been indifferent with mistakes, dead ends and successes al ong the way. Financing strategies can improve the provision, access, and coverage of rehabilitation services, particularly in low-income and middle-income countries. Whilst it can be assumed that any new strategy should be carefully evaluated for its applicability and cost-effectiveness before being implemented, the reality is that rapid implementation negates strategic review. In low and middle income countries, physical and functional rehabilitation is particularly challenging, given human resource shortages and inadequate funding of health care. In these situations, rehabilitation services have evolved in unique ways. They are often strongly linked to humanitarian responses and wider disability actions, and are less connected with mainstream health care than in other settings. Aid agencies from Australia, Germany, Italy, Japan, New Zealand, Norway, Sweden, the United Kingdom, and the United States have supported such activities (Dolea, 2010). The rehabilitation sector is frequently disconnected from the health sector and is closely linked with poverty reduction strategies. Limited resources and health infrastructure in developing countries, and in rural and remote communities in developed countries, can reduce access to rehabilitation and quality of services (World Bank, 2009). In a survey of the reasons for not using health facilities in two Indian states, 52.3% of respondents indicated that no healthcare facility in the area was available (World Bank, 2009). Other countries lack rehabilitation services that have proven effective at reducing long-term costs, such as early intervention for children under the age of five (Stucki et al., 2005; Rimmer, 2006; Storbeck and Pittman, 2008). A study of users of community-based rehabilitation (CBR) in Ghana, Guyana, and Nepal showed limited impact on physical well-being because CBR workers had difficulties providing physical rehabilitation (Stucki et al., 2005). A 2005 global surv ey (SNCDD, 2006) of the implementation of the nonbinding, United Nations Standard Rules on the Equalization of Opportunities for Persons with Disabilities found that: in 48 of 114 (42%) countries that responded to the survey, rehabilitation policies were not adopted; in 57 (50%) countries legislation on rehabilitation for people with disabilities was not passed; in 46 (40%) countries rehabilitation programmes were not established. Spending on rehabilitation services is difficult to determine because it generally is not disaggregated from other health care expenditure. Many countries particularly low and middle income countries struggle to finance rehabilitation, but rehabilitation is a good investment because it builds human capital (Haig et al., 2009). Health care funding often provides selective coverage for rehabilitation services, for example, by restricting the number or type of assistive devices, the number of therapy visits over a specific time, or the maximum cost (Dejong, Palsbo, and Beatty, 2002), in order to control cost. Governments in 41 of 114 countries did not provide funding for assistive devices in 2005 (SNCDD, 2006). In Haiti, before the 2010 earthquake, an estimated three quarters of amputees received prosthetic management due to the lack of availability of services (Bijelow et al., 2004). Poor access to prosthetic services that were available was attributed partially to users being unable to pay (Bijelow et al., 2004). Rehabilitation national survey in India, found two thirds of the assistive technology users reported having paid for their devices themselves (World Bank, 2009). Whilst global strategy recognised the need for appropriate resourcing, very few countries recognised the impact of disability on income. People with disabilities have lower incomes and are often unemployed, so are less likely to be covered by employer-sponsored health plans or private voluntary health insurance. If they have limited finances and inadequate public health coverage, access to rehabilitation may also be limited, compromising activity and participation in society (Crowley, 2003). Global Rehabilitation Issues Availability of Services and Staff National rehabilitation strategies require competent professional staff in great numbers; the global availability however of qualified /experienced rehabilitation professionals is on the decline (Chen, 2006). Not only do the settings for rehabilitation vary greatly from country to country, the availability of rehabilitation services in different settings varies within and across nations and regions (WHO, 2004; Haig, 2007; Tinney et al., 2007; Buntin, 2007; Ottenbacher and Graham, 2007). Haig et al (2009) flippantly concluded that the chance of a person with a disability in sub-Saharan Africa meeting a physician with specialist skills is about the same as that for an Antarctic penguin. Continuous WHO research has revealed wide cross-national disparities in the supply of rehabilitation health professionals. Lower income countries tend to have the lowest densities with less than 0.5 workers per 10,000 inhabitants in many countries of sub-Saharan Africa but also in several across Asia (Bangladesh, Nepal, Pakistan, Myanmar, India) and the Eastern Mediterranean (Iran, Yemen). Many high income countries including Finland, Japan, the United States, the United Kingdom and Canada have workforce densities several times higher (De Savigny and Adam, 2009). This finding is not surprising: large differences across countries and critical shortages of highly skilled professionals in low-income countries have been well documented (Chen, 2006). Building a cadre of trained amputee rehabilitation personnel is a goal of many organisations and governments. Dunleavy (2007) suggests that the quality of the rehabilitation workforce in low-income countries is both disturbing and dangerous. A recent comprehensive survey of rehabilitation in Ghana identified no rehabilitation doctor or occupational therapist in the country, resulting in very limited access to therapy and assistive technologies (Tinney, 2007). An extensive survey of rehabilitation doctors in sub-Saharan Africa identified only six, all in South Africa, for more than 780 million people, while Europe has more than 10 000 and the United States more than 7000 (Haig et al., 2009). Discrepancies are also large for other rehabilitation professions (Saxena et al., 2007). Many developing countries do not have educational programmes for rehabilitation professionals. According to the 2005 global survey, 37 countries had not taken action to train rehabilitation personnel and 56 had not updated medical knowledge of health-care providers on disability (SNCDD, 2006). Despite a huge need for rehabilitation services in both urban and rural Cambodia, for example, hospitals could not afford to hire rehabilitation professionals (Dunleavy, 2007). Global Rehabilitation Issues Communication and Strategy Inadequate health information systems and communication strategies can contribute to low rates of participation in rehabilitation. Barriers to rehabilitation include poor communication across the health care sector and between providers (notably between primary and secondary care), inconsistent and insufficient data collection processes, multiple clinical information systems, and incompatible technologies (DiGiacomo, 2010). Poor communication can result in ineffective coordination of responsibilities among providers (Kroll and Neri, 2003). Complex referral systems can limit access. Where access to rehabilitation services is controlled by doctors (Dejong, Palsbo, and Beatty, 2002), medical rules or attitudes of primary physicians can obstruct individuals with disabilities from obtaining services (Hilberink, 2007). People are sometimes not referred, or inappropriately referred, or unnecessary medical consultations may increase their costs (Eldar, 2000; Holdsworth et al., 2006). The 200 5 global survey (SNCDD, 2006) of 114 countries, revealed 57 did not consult with families of persons with disabilities about design, implementation, and evaluation of rehabilitation programmes. This directly challenged McColl and Boyces supposition (2003) that the development, implementation, and monitoring of strategy and policy should always include users. A study of rehabilitation medicine related to physical impairments in five central and eastern European countries suggested that the lack of strategic planning for services had resulted in an uneven distribution of service capacity and infrastructure (Eldar et al., 2008). Strategy and planning needs to be based on analysis of the current situation, and consider the main aspects of rehabilitation provision leadership, financing, information, service delivery, products and technologies, and the rehabilitation workforce (De Savigny and Adam, 2009), defining priorities based on local need. Many countries have good legislation and related policies on rehabilitation, but the implementation of these policies, and the development and delivery of regional and local rehabilitation services, have lagged. Retention of Rehabilitation Staff Like other health staff, retaining rehabilitation professionals is affected by poor working conditions, safety concerns, poor management, conflict, inadequate training, lack of career development and continuing education opportunities (Crouch 2001; Tinney, 2007; Lehmann, Dieleman, and Martineau, 2008; Tran et al., 2008; Dolea, 2010). High income countries do not suffer from this scarcity, as their economies regularly attract healthcare workers from low-income countries (Landry, Rickets, and Verrier, 2007; Mock et al., 2007; Lehmann, Dieleman, and Martineau, 2008; Willis-Shattuck, 2008; Magnusson and Ramstrand, 2009). Retaining professional workers is especially important as professional workers may have stronger professional than organisational identification reasons for staying (Robertson and Hammersley, 2000). Retention can prove difficult however as turnover tends to be growing rapidly across many industries (Si, Wei and Li, 2008). More importantly, when employees leave they take their know-how with them and thus an organisation risks a potential loss of experience and expertise (Walker, 2001; Frank, Finnegan and Taylor, 2004). Employers invest a lot in recruiting and selecting employees and then invest even more in training and developing them over time. The development of these assets is an important task for human-resource managers (Sutherland, Torricelli, Karg, 2002). Moncarz, Zhao and Kay (2009) found that professional growth is an important retention factor and that in organisations where employees receive the proper training needed to assume greater responsibilities, turnover rates are generally lower (p. 441). Why Staff Stay With Organisations The learning and development of employees is an important retention-supporting strategy (Horwitz, Heng, and Quazi, 2003; Kyndt et al., 2009). Tymon, Stumpf and Smith (2011) note how retaining the best professional talent is of great practical significance to organisations as it eliminates the recruiting, selection and on-boarding costs of their replacement, maintains continuity in their areas of expertise, and supports a culture in which merit can be rewarded (p. 293). Advancement opportunities appear to motivate high-performer retention more so than other employees (Hausknecht, Rodda, and Howard, 2009). The role of management as a key factor in the retention of professional workers has been cited by several studies. Andrews and Wan (2009) link improved nurse retention to manager behaviour (p. 342) and Snyder and Lopez (2002) emphasize the role of leaders in an organisation in encouraging the talent of the organisation to stay. Research has shown that as long as employees feel that they are learning and growing, they will be less inclined to leave. On the other hand, once employees feel they are no longer growing, they begin to look externally for new job opportunities (Rodriguez, 2008). Factors influencing retention appear to be the existence of challenging and meaningful work, opportunities for advancement, positive relationships with colleagues, empowerment, responsibility, recognition of capabilities and performance contributions, rewards, good work-life balance, good communication within the organisation, managerial integrity and quality, and new opportunities/challenges (Arnold 2005; Herman 2005; Pitts, Marvel, and Fernandez, 2011; Allen and Shanock, 2013). The role of management as a key factor in the retention of professional workers has been cited by several studies. Andrews and Wan (2009) link improved nurse retention to manager behaviour (p. 342) and Snyder and Lopez (2002) emphasize the role of leaders in an organisation in encouraging the talent of the organisation to stay. There appears to be two aspects of management that are particularly important in retention these being the adoption of an appropriate style of leadership (Spence Laschinger et al., 2009) and perceived management support (Paillà ©, 2013). Since learning and development opportunities appear crucial for the retention of talented employees (Arnold, 2005; Echols, 2007; Rodriguez, 2008; Kroon and Freese, 2013) an organisation must establish a supportive learning and working climate. This makes development and learning critical for attracting and retaining employees, because talented people are inclined to leave if they feel they are not growing and stretching (Michaels, Handfield-Jones, and Axelrod, 2001, p. 14). Relocation and Strategy Relocation is among one of the most radical strategic decisions a firm can make (Isabella 1990). Relocation is essentially a form of organisational change, which, in its simplest form, can be defined as a difference between new and old settings (Weber and Manning, 2001, p. 229). Even when completed within the same vicinity, it is a complex and unsystematic process involving several stakeholders, phases and decisions (OMara, 1999). Whilst relocation can be perceptualised as a golden opportunity, with organisations using change as a catalyst to introduce elements of organisational change (Inalhan, 2009), it can have a significant impact on real estate costs, productivity, efficiency, workforce satisfaction, and meeting the overall business objectives (Morgan and Anthony, 2008; Christersson and Rothe, 2013). For employees, the combination of workplace redesign and relocation can be challenging. Not only are they facing a change in their workspace, they also lose the organisational patte rns and roles that were a part of the old premises (Milligan, 2003). Additionally, the way the change is delivered can also impact on how the change is received (Bull and Brown, 2011; Vischer, 2011). At an organisational level, many positive effects of relocation have been identified; positive changes in employee behaviour: enhanced employee satisfaction and productivity: improved decision-making, collaboration and cross-selling: improved retention and recruitment: reduced churn costs: and positive client feedback (Morgan and Anthony, 2008). On the other hand, relocation can also be risk-laden (Rasila and Nenonen, 2008). People form emotional links to physical environments, called place attachment (Milligan, 2003; Inalhan, 2009), and a relocation inevitably causes a disruption in this relationship to the old premises with some employees experiencing loss and grieving (Inalhan, 2009) or even a form of organisational death (Milligan, 2003). Early employee involvement and empowerment to participate in decision-making should be a part of projects where workplace change is significant and a part of a cultural transformation. Effective managerial communication in an organisation helps to connect with employees, build positive relationships and frame attitudes and behaviours of employees in the workplace and numerous studies state that communication plays an important role in the change process (Elving, 2005; Hayes, 2007) and some even claim that employee communication can mean its success or failure (Barrett, 2002). Communication of the reason and impact of the workplace change is significant in influencing the participants to accept change, and it is suggested to be even more important than the frequency or amount of information supplied (Bull and Brown, 2011). Despite this, employee experiences of the relocation process have not been widely addressed, with the exception of needs and experiences of employees in long-distan ce relocations, where organisations move to a new geographical area and the employees will have to move to a new home to stay with the company (Rabianski, 2007). Studies conducted within a relocated setting, often focus on comparing employees experiences of the old office with the new one (Brennan, Chugh, and Kline, 2002; Brown et al., 2010), but do not give attention to how employees experience the change in location. Conclusion The current economic situation has severely impacted global rehabilitation services. In low and middle income countries, inadequate resourcing combined with an ineffectual health infrastructure and consistent neglect of rehabilitation services, leaves patients facing lifelong disability. Some countries are barely able to provide a single rehabilitation practitioner. Beset by the net effects of an ever increasing population, the increasing health burden will continue to destabilize and overwhelm the most basic rehabilitation services. Even affluent countries (UK and USA) struggle to retain or recruit personnel, depending on industrial-scale immigration of qualified rehabilitation staff from countries who can barely afford their release. Nations (and naturally organisations, the DMS and MOD) recognise the qualities an experienced workforce can deliver. With the prospect of relocation, retaining these workforces can be difficult. Thus, the availability and maintenance of personal and professional development are key retention strategies. Relocation however, can have diverse results. On the one hand it can result in positive changes in employee behaviour, enhanced employee satisfaction and productivity; on the other it can result in a significant impact on the workforce, leading to the loss of staff with a resulting shortfall in experience and expertise. Though there are a number of researchers that have investigated healthcare workers perspectives of relocation and retention, this literature review has revealed a lack of any available UK military associated research of its military or civilian staff. The next chapter will attempt to address the DMRC civilian rehabilitation workforces retention and relocation perspectives through a research methodology that will encompass a qualitative focus group and cross-sectional quantitative investigation.

The effect of location decision on a business success

The effect of location decision on a business success 2.1 Introduction Todays competitive market demands companies to deliver their products and services as effectively and efficiently as possible. The distribution strategy is the key to the success. One of the key components of a distribution network is warehouse location. Location decision is considered as a long-term business strategic decision. The correct location decision can resulted in significant improvement in business processes and performance, and bring competitive advantages (i.e. cost saving, service quality, etc.) over its competitors. On the other hand, if a poor location decision was made, it could equally cost the company time, money and opportunity. The location decisions environment is dynamic and normally described as a multi-criteria decision. Furthermore, the globalisation and the rapid evolution of information technology have changed the characteristics of location problems. There are two major trends in facility location selection accordingly to Yang and Lee (1997). First, there has been an increased interest to gain potential competitive edge in the global marketplace. Second, small to medium-sizes communities has become more attractive to many businesses as new facility location. These two trends are influenced by the more advanced communication technology, better transportation infrastructure system, liberalised trade between countries, and so on. This allows company to select their facilities where they think has the most advantages (i.e. in land cost, labour cost, skilled labour availability, etc.). This chapter will start by identifying why a company needs to improve its logistics system, then defining the linkage between the organisations strategy and the logistics strategy, followed by the general roles of warehouse in distribution strategy. Then it will present the influencing location factors companies normally consider when they make location decisions. And finally in the latter section of this chapter, it will present literature reviews of decision aid techniques and model used in location decisions. 2.2 Logistics system and the changing business environment Why do we need to change our logistics operations and strategy? The main reason why we need to change is because the environment we live in is constantly and rapidly changing. In order to survive in this unforgiving environment businesses are forced need to change. There are many factors given by Rushton, et al. (2006) including increasing customer demand, reducing product life cycle, changing technologies, increasing pressures from competitors, and so on. The pressures for change given by Rushton, et al. (2006) are illustrated by the figure 1. Figure 1 Pressure influencing logistics systems 2.3 Logistics strategy Logistics strategy should aim to establish the most appropriate blend of storage and transport at a given customer service level. Efficient logistics and distribution strategies should reduce the total logistics costs and must take into account the interactions of various the various replenishment activities in the distribution chain (Rushton, et al., 2006; Teo Shu, 2004). Chopra and Meindl (2004) suggest there are four drivers to a successful distribution system: (1) Facilities location, capacity, operations methodology, and warehousing methodology; (2) Inventory cycle inventory, safety inventory, seasonal inventory, and sourcing; (3) Transportation mode of transportation, route and network design, and in-house or outsource decision; and (4) Information push or pull, coordination and information sharing, forecasting and aggregate planning, and enabling technologies. Bowersox and Closs (1996) suggest similar points but they also add another driver which is network design. They also claim that classical economics often neglected the importance of facility location and overall network design. Similarly but in more details, Alling and Tyndall (1994) identify ten principles that make logistics operations successful. They are: (1) to link logistics to corporate strategy; (2) to organise logistics comprehensively; (3) to use the power of information tech nology; (4) to emphasize human resources recognising the importance of quality human resources; (5) to form strategic alliances; (6) to focus on financial performance; (7) to target optimum service levels; (8) to manage the details pay attention to details as it can be significant savings; (9) to leveraging logistics volume through consolidating shipment volumes, inventories and the like; and (10) to measure and react to performance. Furthermore, when considering a distribution strategy, warehousing strategy is an important part and typically the decision makers or logistics planners has to answer these questions (1) should warehousing facilities be owned, leased or rented, (2) what is the optimal size and number of warehouses, (3) what are the optimal locations for warehouses, (4) what product line should be stocked at each warehouse location, and what market areas should be serviced from each warehouse location. (Stock Lambert, 2001; Bowersox Closs, 1996; Simchi-Levi, et al., 2003; Bowersox Closs, 1996; Geoffrion Powers, 1995; Bender, 1994; Stock Lambert, 2001; Greasley, 2009) Matching logistics strategy to business strategy The important key to achieving the strategic fit is the ability of the company to find a balance between responsiveness and efficiency that best matches the business strategy. Whatever strategies chose to implement by the company, there will be impacts. And the impact of the selected logistics and distribution strategy has to be assessed against the business strategy. Often these may involve undertaking some qualitative analysis where it is impossible to derive good quantitative measures. The main areas of where this will impact, they are (Rushton, et al., 2006): a) Capital costs this is the costs of new facilities, new equipments, and so on. In certain situations capital constraints can exclude otherwise attractive options; b) Operating costs the minimum operating cost is often the main criterion for selection between options. In some cases increased operating costs can be accepted in the light of future flexibility; c) Customer service Although options should have been developed against customer service targets, the selected short list must be examined for the customer service level achieved. The balance of the mix might have changed in an effort to reduce costs. Stock held close to the customer might need to be increased to improve service reliability. 2.5 Obstacles to achieving strategic Fit As many as there are many factors and influences to achieving the strategic fit in the supply chain, there are also many obstacles to achieving the same goal as Chopra and Meindl (2004) and few other writers mention. Few examples of the obstacles to strategic fit are: a) the variety of products the increasing variety of products tends to raise uncertainty and uncertainty tends to raise costs and reduce responsiveness within the system; b) the product lifecycles the decreasing product lifecycles also tends to raise uncertainty and reduce the window of opportunity to achieving strategic fit; c) the increasingly demanding customer customers demand for faster fulfilment, better quality, and better value for money for the product they buy, companies must be able to provide these just to maintain their businesses; d) the fragmentation of supply chain ownership less vertically integrated structure can result in difficult coordination to achieving strategic fit; e) the effect of globaliz ation difficulties raised by the invasion of foreign players. It is noticed that these factors are the same factors which drives the need to improve logistics system as determined in section 2.2. 2.6 The logistics and distribution planning framework Many authors agree on the first and the most important step, when planning the logistics and distribution, which is to identify the objective and strategies of the organization. Then it follows by the second step which is to gain a detailed understanding of the present position of the system. The rests of the procedures are identifying the options, analysing the options, comparing and evaluating the results, and developing a planning and implementation. A diagram illustrating the approach to distribution planning by Rushton, et al. (2006) is shown in the figure 3 below. Figure 2: An approach to logistics and distribution planning (Rushton, et al., 2006) 2.7 Optimal number of warehouses The optimal number of warehouses can be found by using a costing model, a model which takes into account of variable costs, particularly the transport and operating costs. Few facilities give low cost for inward transport, but high cost for outward transport, as they are, on average, further away from customers. On the other hand, more number of facilities can give higher cost for inward transport, but the cost for outward transport is lower, as they are, on average, closer to customers. Another cost that varies with the number of facility is the operating costs. Higher number of facilities means the company has to bear more expensive cost to operating these facilities. Operating costs also vary with facility size. Generally, larger facilities give the economies of scale; however, this is not always the case. Higher cost from operating larger facilities may come from the cost of supervision, communication, inefficiency and so on (Attwood Attwood, 1992; Bowersox Closs, 1996; Waters, 2003; Chopra Meindl, 2004; Rushton, et al., 2006). Figure 4 graphically illustrates the relationships between number of facilities and costs incurred. Figure 3 Relationship between costs and numbers of facilities. The need to hold inventories Prior to planning and designing logistics and distribution system, it is very important to be aware of the reason why a company need to hold stock. The most common objective of a supply chain is to efficiently balancing demand and supply. As most people understand that it is impossible to precisely synchronise or balance the requirements of demand with the fluctuations of supply. Therefore stocks are there to provide buffer between supply and demand. Rushton, et al. (2006) reviews the important reasons to stock, as follows: a) to keep down production costs keeping production to run as long as possible, as the costs of setting up machine is often expensive; b) to accommodate variation in demand to avoid stock-outs by holding some level of safety stock; c) to take account of variable supply (lead) times to cover any delays of supplies from producers and suppliers; d) to reduce buying costs often there are administrative cost of placing an order, holding additional inventory can red uce these costs; e) to take advantage of quantity discounts often goods are offered at a cheaper cost per unit if they are ordered in large quantity; f) to account for seasonal fluctuations certain products are popular in a certain time of the year, retailer normally pile-up inventory during low demand season to cater the demand in high season; g) to allow for price fluctuations/speculation the price of certain products, steel for instance, fluctuate due to variety of reasons. Some companies buy in large quantity to cater this; h) to help the production and distribution operations run more smoothly stock is held to decouple two different activities; i) to provide customers with immediate service stocks enables companies to provide goods and service as soon as they are required to maximise the sales opportunity. This is essential in highly competitive markets; j) to minimise production delays caused by lack of spare parts Breakdowns of machineries required to produce goods or s ervices can be very costly to business. Having spare parts to fix the machineries as soon as it breakdowns is an advantage; k) to facilitate the production process by providing semi-finished stocks between different processes (Work-in-Progress). 2.9 Roles of warehouse Why businesses need warehouse? There are many reasons why business needs warehouses. Warehouse has many roles apart from providing storage and supplying the materials or finished goods to producers or retailers as reviewed in the previous section. In fact warehouse has many other roles and functionalities which can be classified on the basis of economics and service accordingly to Bowersox and Closs (1996). On the basis of economics, a warehouse is economically justified when the total logistical costs are reduced by providing the facility. On the basis of service, a warehouse is justified when the overall logistical system can provide a better service, in terms of time and place capability. Here are some common roles of a warehouse (Bowersox Closs, 1996; Higginson Bookbinder, 2005; Rushton, et al., 2006): Role as a make-bulk/break-bulk consolidation centre making bulk and breaking bulk are traditional functions of a warehouse/DC. In a break-bulk facility, large incoming loads are aggregated, often for product mixing and to create consolidated out- bound shipments. A make-bulk facility, or consolidation centre, com- bines small quantities of several products in fewer, larger assortments. Role as a cross-docking station Cross-docking is a process where the product is received, occasionally combined with different products going out to the same destination, and then shipped at their earliest opportunity without being stored. Cross-docking has many benefits, including: faster product flow, no inventory pile-up, reduced product handling, and reduce cost due to elimination of those activities. Role as a transhipment facility transhipment refers to a process of taking a shipment out of one vehicle and loading it onto another. It only occurs when there is a good reason to change transportation modes or vehicle types. Role as an assembly facility Hewlett Packards distribution centre is a good example of the role as an assemble facility. It also benefits from the idea of postponement which allows product differentiation until later stages. Products are designed to use generic parts and assemble at the warehouse. Role as a product-fulfilment centre the major function is to find the products that are ordered and directly deliver them to the final customer. Amazon.com warehouse is a good example. Role as depot for returned goods the major functions are to inspect and separate the returned good into those that can be repaired, repackaged, resale, or recycled. 2.10 Transportation Accordingly to Chopra and Meindl (2004), the target level of service the company sets determines the role of transportation in a company competitive strategy. If the company is targeting customers whose main criterion is price, then the company can use transportation to lower the cost of the product at the expense of reponsiveness. But more often companies tries to achieve the right balance between efficiency and responsiveness using both inventory and transportation. Often in logistics plannings, decision to make to make any changes based on the costs of transportation. Accordingly to Rushton, et al. (2006), the transportation costs can be broken into three main types. The first one is the fixed costs these costs must be borne whether the vehicles run for 10 or 100 kilometres and might include the depreciations of the vehicles, the licence fees, the insurance, etc. And these may vary from one vehicle to another depending on various reasons. The second type is the variable costs these costs vary in relation to the activity of the vehicles, i.e. how far the vehicle travelled. The most obvious example of a variable of cost is the fuel cost. And the last type is the overhead costs these costs are indirect costs that are borne by the whole fleet of vehicles. They may be the usual business overheads that are required to run the vehicles, i.e. staff salaries, telephone, internet, and other administrative expenses. 2.11 Location decision objectives Warehouse site selection is a complex process involving multiple, both qualitative and quantitative, criteria. And often location decisions have more than one objective depending on the organisations objectives and strategies. Current, et al., (1990) classified the objectives for facility location problems into four general categories namely: (1) Cost minimisation; (2) Demand Oriented; (3) Profit maximisation; (4) Environment concern, and often these objectives are found to overlap each other. For retailing business, cost minimisation and profit maximisation are often the main objectives. 2.12 The influences of warehouse site location selection It is important to effectively identify potential locations for the new warehouses. Typically, these locations must satisfy a variety of conditions and the potential locations should meet all the requirements. The potential locations should take into account the future demand and that the decision should have an impact on the firm for at least the next three to five years (Simchi-Levi, et al., 2003). Many authors (Chase, et al., 2004; Barnes, 2008) suggested that the choice of facilities location is influenced by two principles. The first one is the need to locate close to customer due to time-based competition, trade agreement, and transportation cost. And the second one is the need to locate close to the access to resources such as labour, raw material, and specialist skills and capabilities. Often the two principles are taken into account when an organization makes a decision on the choice of location. The characteristics of operations of business (i.e. Manufacturer or service provider) will govern the weight of factors should be taken into account. Barnes (2008) looked at the location decision on the international perspective where the influential facility location factors are more in numbers and level of complexity. However, these factors can be adapted and used for domestic facility location. Here is the list of major factors which in themselves comprises of several sub-factors given by Barnes (2008): Costs; Labour characteristics; Infrastructure; Proximity to suppliers; Proximity to market/customers; Proximity to parent company facilities; Proximity to competition; Quality of life; Legal and regulatory framework; Economic factors; Government and political factors; Social and cultural factors; and Characteristic of a specific location. Bowersox and Closs (1996) concentrated on the warehouse location analysis in the context of logistical network strategy. He discusses about three warehouse location patterns namely Market-Positioned Warehouse, Manufacturing-Positional Warehouse, and Intermediately Positioned Warehouse. They imply the similar idea of the two principles suggested by Chase, et al. (2004) and Barnes (2008). They also discussed the warehouse location from the viewpoint of transportation economies and from the viewpoint of inventory economies. Furthermore they incorporate the concept of Least-Total-Cost system where the sum of total inventory cost and transportation cost is minimal to design the warehouse network. The conditions or attributes of potential warehouse locations reviewed from many literatures are summarised as follows: Site-related factors Regional factors Land cost/size/soil characteristics/ drainage Proximity to market Construction costs/leasing cost/renting costs Proximity to suppliers Transportation facilities/cost Proximity to competitors Zoning restrictions Proximity to industry Community factors Geographical characteristics Quality of life/cost of living weather characteristics Public facility accessibility Labour cost/availability/skill Taxes Energy availability/cost Environment regulation Telecommunication facility Local government support/incentives Political matters and regulation Sustainability Transportation infrastructure 2.13 Methods and techniques in facility location problems In this section, we will review the methods, techniques, and approaches found in a number of literatures. Bowersox and Closs (1996) claim that a sophisticated modelling and analysis techniques are required in location decision because the location analysis is very complex and data-intense. The complexity is created because of the number of locations multiplied by the alternative location sites multiplied by the stocking strategies for each location. Meanwhile, the data intensity is caused by the requirement of detailed demand and transportation information. Furthermore, the facility site selection process is complicated by the impact of environment legislation and related political issues (Bowersox Closs, 1996). Thai and Grewal (2005) suggest the conceptual framework of location selection for distribution centre that consists of three main stages. The first stage is a general geographical area for distribution centre is identified based on the Centre-of-Gravity principle. The second stage is the identification of location alternatives of distribution centre and associate gateway airports/seaports. At this stage a qualitative approach should be applied. The third and final stage concentrates on the specific site selection based on the quantitative approach, i.e. The distribution centre should be place where the integration of volumes transported and distance involved is minimum and also the total distribution cost is minimum. 2.13.1 Decision-aid Techniques and Models Several operations management books (Stevenson, 2007; Barnes, 2008; Greasley, 2009) have their sections on facility location selection techniques and some common influencing factors as reviewed in the previous section. Accordingly to works of Simchi-Levi, et al. (2003), Rushton, et al. (2006), and Bowersox and Closs (1996), there are three categories for tools used to support location analysis. The first type is the analytic techniques. The second type techniques are the mathematical optimisation techniques which can be subdivided into two types: the exact algorithms that find least-cost solution; and the heuristics algorithms that find good solution. And the third type of techniques is simulation models that provide a mechanism to evaluate specific design alternatives created by designer. The simulation models will not, however, be included in the discussion. Accordingly to Randhawa and West (1995), the facility location problem can be approached by considering the location search space as continuous or discrete. Continuous space allows facilities to be located anywhere in the two-dimensional space; it normally assumes that the transportation costs are proportional to some distance measure between the facilities. Though easy to solve, the continuous approach may yield impractical results. The discrete space approach limits the number of possible locations to a finite set of predetermined sites, and the transportation costs are not necessarily function of distances. Four common types of techniques found on these books namely: (1) the Centre of Gravity Method i.e. finding a location that minimises the distribution costs; (2) the Locational Cost-Volume analysis i.e. comparing the total costs between location alternatives by graph plotting; (3) the Factor Scoring i.e. finding the location alternative with highest composite score; and (4) the Transportation model i.e. a linear programming model that shows location alternative with the most optimal solution (the lowest costs). 2.13.2 The Centre of Gravity Method The Centre of Gravity Method (CoG) is a method for locating a distribution centre that minimises the distribution costs. The main assumption of this method is the distribution cost is a linear function of the distance and the quantity transported, and that the quantity transported is fixed for the duration of the journey (Stevenson, 2007 Greasley, 2009). The locations of destinations are presented on the map with coordinate X and Y in an accurate scale. The location of the distribution point should be located at the centre of gravity of the coordination calculated by these following equations: Where = Quantity to be transported to destination i = x coordination of destination i = y coordination of destination i = x coordinate of centre of gravity = y coordinate of centre of gravity This technique is commonly used to solve location problems at a macro level. The method is applied to solve location problems in many fields other than location of a distribution centre such as school, fire centres, community centres, and such, taking into consideration location of hospitals, population density, highways, airports, and businesses (Stevenson, 2007). Bender (1994) argues that the CoG approach had became obsolete because of the replacement of other computerised approach including linear programming. He also discusses the limitation of the approach which ignores all constraints, such as capacity, financial, operational, legal, and all cost other than transportation. It is also assume that all the transportation costs are directly proportional to distance, and independent of the direction of traffic. 2.13.3 Locational Cost-Volume Analysis This method is an economic comparison of location alternatives which involves determining the fixed and variable costs for each location alternative. The method indicates which location is suitable for a particular volume level by analysing the mix of fixed and variable costs. The fixed cost plus variable costs line is plotted for each location alternative on the graph and the location with the lowest total cost line at the expected volume level is chosen. A total revenue line can also be plotted on the same graph to compare which location alternative has the earliest breakeven point if the objective is to consider the quickest breakeven location (Stevenson, 2007). The equation for expressing the cost is: Where TC = Total distribution cost VC = Variable cost per unit X = Number of units produced FC = Fixed costs This type of economic analysis is very common tool to compare which options have the highest rate of return and is not only limited to location problems. However, Stevenson (2007) suggests that, in most situations, it is very important that other factors other than costs must also be considered. The Locational cost-volume analysis alone is not sufficient to make decision. 2.13.4 Factor Rating Method The Factor Scoring method is sometimes known as weighted scoring or point rating, which attempts to take a range of considerations into account when choosing a location. Then technique starts by indentifying the relevant factors, then assign a weight to each factor that indicate the importance compared with other factors, given that all the weight sum up to one. Scores then have to be given by decision makers to each factor for all location alternatives. The total weighted scores for each location alternative are then calculated by multiplying the factor weight by the score for each factor, and sum the results for each location alternative. The alternative with highest score is chosen unless it fails to meet the minimum threshold, if there is one (Stevenson, 2007). The drawback of this method is identifying and determining the appropriate factors and weighting for each factor. Factors like quality of living and labour attitude are intangible factors and hard to quantify. Greasley (2009) suggested an approach to compare the tangible and intangible factors by conducting an intangible factors only assessment by the method, and then determine if the difference between the intangible scores is worth the cost of the difference in tangible costs between the location alternatives. Data collection, statistical estimates, optimization and simulation models, and economic analysis are some of the methods used to assess quantitative attributes. Qualitative attributes represent subjective factors for which it is generally difficult to define a natural measurement scale. Descriptive classes or interval scales (for example, 0 to 10) can be established to enable a numerical value to be assigned to represent how a site scores with respect to a particular attribute (Randhawa West, 1995). Linear Programming and location problems Linear Programming is one of the most widely used strategic and tactical logistics planning tools. The transportation model helps decision maker to decide the facility location based on the transportation costs. The model is very useful as it can compare the resulting total costs for each location alternative. Other costs like production costs can also be included in the model by determining the cost on a per-unit basis for each location. There are three major pieces of information needed to use the model as following (Stevenson, 2007; Balakrishman, et al., 2007): a) list of origins and each ones supply quantity per period; b) list of the destinations and each ones demand per period; and c) the unit cost of transporting items from each origin to each destination. The method can be used to solve for optimal or near-optimal locations. Even though the optimisation models are designed to provide an optimal solution, they can be used to analyze a problem under different scenarios (differe nt combinations of constraints and cost parameters). The result would be a set of location alternatives that are the preferred choices under different operating conditions. Furthermore, examination of a solution will generally result in the identification of more than one specific site. Such sites may then be further analyzed and compared using a multi-criteria model (Randhawa West, 1995). There are many types of mathematical programming models and they can be classified accordingly a variety of conditions. Aikens (1985) classified distribution location models accordingly to: a) whether the underlying distribution network (arcs and/or modes) is capacitated or incapacitated; b) the number of warehouse echelons, or levels (zero, single, or multiple); c) the number of commodities (single or multiple); d) the underlying cost structure for arcs and/or nodes (linear or nonlinear); e) whether planning horizon is static or dynamic; f) the patterns of demand (e.g. deterministic or stochastic, influence of location, etc.); g) The ability to accommodate side constraints (e.g. single-sourcing, choice of only one from candidate subset, etc.). Aiken (1985) gives some examples of types of distribution location mathematical programming models: a) Simple incapacitated facility location model; b) Simple incapacitated multi-echelon facility location model; c) Multi-commodity incapacitated facility location model; d) Dynamic incapacitated facility location model; e) Capacitated facility location models; f) Generalised capacitated facility location model; g) Stochastic capacitated facility location model; and h) Multi-commodity capacitated single-echelon facility location model. Diabat, et al. (2009) also show that the techniques can be applied to solve location-inventory problems which finds the number of warehouses to establish , their locations, the customers that are assigned to each warehouse, and the size and time of orders for each warehouse so as to minimise the sum of inventory. Melo, et al. (2009) review many literatures related to facility location problem that show that linear prog

Wednesday, September 4, 2019

The American Dream: Success, Happiness, And Money :: American Dream Essays

I believe that the American Dream today is based on success, happiness, and money. The reason i think this is because the reason people go through all those years of schooling is to become succufal, in return for being successful you make money, and because of money you can get and do the things you want, which in return makes you happy. Happiness is not all money, it also has to do with love. Lets first start off talking aboutnthe success, and money part. American children start school at the tender age of four. In pre school you are taught to get along with other kids, and to share, and color in the lines. In Kindergarten You first get an intro. to reading and write-in, and in some schools a little simple addition, and subtreacing. Then from there you move on to grade school, first grade through fifth grade. These years you are taught lot of math, reading, writing, and also penmanship in script. You also get a taste of history. When you get to middle school you learn more in depth about everything you learned in earlier years. Finally in High School, everything you have learned is intensified, and you get prepared for collage, and learn more of everything. Then you have to make a decision, If you want to be Successful and make Lot of MONEY you have to go to collage, for a nether four years, at the end of that ordeal you can settle in with Bachelors degree, or a nether one or two for a masters. This will bring a decent income. But if you want the really good jobs you need nether three or four years to get a doctorate degree, or a law degree. What I have just described is what a modern American kid has to go through to be considered suscefull and to have money, I mean we are talking about 22 tears of different types of school. this almost thirty percent of your life spent in school so the rest of your years can be good ones. Lastly I will discuss happiness. Many people think haplessness revolves around money, and many people don't. I personally think it does to a certain degree. I think you don't need to be rich or successful to be loved and have a nice family.

Tuesday, September 3, 2019

Statement of Educational Philosophy Essay -- Philosophy of Education T

Statement of Educational Philosophy A person’s philosophy of education is important because it affects the way that their classroom will be run. To be a good teacher, a person should genuinely like the students and want to make a difference in their lives, giving them the confidence to succeed. There are many things that go into developing an educational philosophy: The nature of the students, the nature of knowledge, the purpose of education, the method of education, and the curriculum. I believe that every student is very different. Each student should be treated as an individual and not be just grouped together without any personal identification of their own. Most children seem to learn better by watching adults rather than listening to them, hence the old saying, â€Å"actions speak louder than words.† Children seem to be pretty stubborn and want to find things out for themselves. For example, you can tell a child over and over again not to touch a hot stove but it may not really sink in until they touch it that one time and get burnt. This is also an example of children wanting to do their own thing. I agree with Foucoult in that most humans desire the power to have their own way. In my opinion, knowledge is both relative and absolute. Some things are constructed while others are discovered. For example, the sun rises in the east. This was discovered many years ago and is true everywhere and throughout time. A person that writes computer programs constructs knowledge. They take different pieces of knowledge and put them together to develop new things and new knowledge. Some knowledge is always changing because of the technological advancements in today’s society; however, some things never change. I... ...ing that everyone should know Calculus, but people should have a basic knowledge of addition, subtraction, multiplication, and division. These basic skills are essential to everyday life and I think that everyone should be able to use them. In conclusion, I feel that education is a very important thing. Everyone should be educated at least in the basics. People should care about themselves and want to make themselves the best that they can be and not just settle for what they are. Education should instill the desire to achieve in our students. New things are discovered everyday. Keeping up with society can be difficult but I definitely think that it has its rewards. I feel that God has given me a gift for being able to help others by teaching. I want to do all that I can to help shape the future of our society by using my talent to the best of my ability.

Monday, September 2, 2019

Apes Ecological Footprint Lab

APES Ecological Footprint Lab In the Ecological footprint lab I had learned that my family uses a lot of resources, goods and etc. In some parts of the calculations for the ecological footprint my family would either use less and in some parts of the footprint my family would use more of. That my ecological footprint is 5. 6 hectares. 5. 6 hectares is about 14 acres. Just for the goods, housing, food, transportation, services and waste my family is spending about 56,285. My ecological footprint is high, and my family, including me should not be using as much items, or spending money on waste, when we do not have to.Exactly what is an ecological footprint? An ecological footprint is the amount of biologically productive land and water needed to supply an area with resources and to absorb the wastes and pollution produced by such resource use. It is an estimate of the average environmental impact of individuals in a given country or area. The per capita ecological footprint is the aver age ecological footprint of an individual in an area. Humanity’s ecological footprint exceeds by about 39% of the earth’s ecological capacity to replenish its renewable resources and to absorb the resulting waste products and pollution.With the United States the footprint per person or hectares per person is 9. 7. Way over of what we are suppose to be using, when a country’s ecological footprint is larger than its ecological capacity, it is using and degrading its cropland, forest, etc. With my family, were using 5. 6 hectares which is almost half of what other people are using. When a country depletes its natural capital, it must either suffer the harmful environmental consequences or import food and other resources from other countries and export its pollutants and wastes to global atmosphere, oceans, and rivers that run through several countries.There are also some other developed countries like ours. Developed countries are countries that have a high level o f development according to some criteria. The first industrialized country was Britain, followed by Belgium, Germany, United States, France and other Western European countries. One of the most developed countries in China. China now consumes almost twice as much meat and nearly two and a half times more steel. By 2020, China is projected to be the world’s largest producer and consumer of cars and to have the world’s leading economy in terms of GDP-PPP.If China’s economy continues growing exponentially at 8-10% a year, by 2031 the country’s income per person will reach that of the United States in 2006. If this happens China will need two-thirds of the world’s current grain harvest, twice the world’s current paper consumption, and more than the current global production of oil. Then are countries that are not like China, for instance Africa. Africa would be an undeveloped country. Underdeveloped countries are at the very bottom of the global economy, with widespread extreme poverty and dire living conditions.That is because they usually have little or no infrastructure or reliable health care and other social services. Many have experienced long-term political unrest in the form of civil war or armed conflict with other nations, or have been subject to unstable governments, dictatorships, and/or corruption. In addition, they may frequently suffer environmental events and natural disasters that cause famine, destruction, and displacement of large segments of their populations.According to the UN, the African countries that experienced the sharpest declines in their HDI rankings between 1990 and 2003 are South Africa, with a drop of thirty-five places; Zimbabwe, with a drop of twenty-three places; and Botswana, with a drop of twenty-one places. The main indicators on the human development index include life expectancy and health, literacy and educational attainment, and income. Human Development Report 2005 noted that ch ances of survival for a person born in sub-Saharan Africa between 2000 and 2005 are not much better than those of individuals living in England and Wales during the 1840s.Ways to improve this issues is by trying to help out our underdeveloped countries. With our developed countries we already have more than we need. So we should help transport goods to the countries that are in a more poorer state. With the resources and goods, if we do not need them, then we do not need to buy them. Also people could cut back on much water we use, food being wasted, etc. We could all recycle bottles and anything else that needs to be recycled because those recycle bottles can be reused, that way it does not build up our pollution of waste. People should try to find a way to stop polluting the air.

Sunday, September 1, 2019

Energy Drinks Essay

Something I learned in my last Health class is the ever-increasing use of today’s new â€Å"Energy Drinks. † Caffeine is the single most used drug in America. How many of us must have that morning cup of coffee before heading out the door? How many college students are staying up late at night preparing for a mid-term or final exam by drink these new, all natural, safe, energy drinks? You may want to read their labels and adjust your thinking. You may want to include a little research in regards to these drinks. At this time there is no long-term research to report on in regards to energy drinks. What we do know is that these drinks have a variety of ingredients such as ginseng, amino acids, ginkgo, various vitamins, and high amounts of sugar. However, the primary active energy ingredient is caffeine. At this time, the FDA does not regulate the amounts of caffeine that are in these drinks. They suggest that within a 12-ounce beverage serving the amount of caffeine should be 68 milligrams or less. A report published by the Journal of Analytical Toxicology showed that of ten of the most popular energy drinks had as high as 141 milligrams in one 16-ounce serving. The following 12-ounce energy drinks showed, Monster at 120 milligrams, Red Bull at 116 milligrams, and Amp contained 107 milligrams of caffeine. To give a comparison, look at Coke and Pepsi. They only contain between 34 to 38 milligrams of caffeine. Energy drinks have risen significantly in popularity in the last few years with revenues exceeding $3. 5 billion a year and growing. One report states that with the new found popularity there are growing concerns of the possible health effects among children, adolescents, and young adults. It states that 30 to 50 percent of America drinks energy drinks. Of this amount they report that one third are from the ages of 12 to 24 consume these beverages on a daily basis. Due to these beverages being chilled makes them easier to consume quickly. High doses of caffeine have been linked to seizures, cardiac problems, mood or behavioral disorders, and diabetes. Additionally, these problems have been linked specifically to the consumption of energy drinks among children, teens, and young adults. There has been a growing concern amongst the medical community, parents, and school officials in regards to these energy drinks on our youth. Numerous reports are being found to the adverse affects these high caffeine drinks are responsible for. The Illinois Poison Control Center reported in a recent survey of more than 250 cases of caffeine overdose in a three-year period. The average age of these accounts was 21. A doctor from California reports that an eighteen year young man received treatment for an abnormal heart rhythm after consuming eight 16-ounce energy drinks per evening to remain alert during his night job. Another growing concern is the use of these energy drinks as a mixer with alcohol. A study from 2006 showed that the individuals surveyed were just as impaired in motor coordination and reaction time as individuals drinking alcohol alone. As stated earlier, there is not much evidence on the effects of long-term use of caffeine on children or teenagers. It is known that it can create physiological and psychological dependence in adults. This being true, we must do everything possible to protect our children from these non-regulated beverages. We need to insist on more research to be conducted in order to better inform the public of the consequences of the consumption of these highly-caffeinated energy drinks and the adverse effects they have on our youth. (Word Count 606) Flores, D. (2011, 03 16). Health Effect of Energy Drinks on Children, Adolescents, and Young Adults, Retrieved 07 12, 2012, from ArticlesBase. com: http://www. articlesbase. com/wellness-articles/health-effects-of-energy-drinks-on-children-adolescents-and-young-adults-4423299. html.